Hello Anne
I hope this email finds you fit and well and thank you for the mention in the March edition of MKM. It’s brilliant of you and thanks also for the article on full needle ribs. I’m as indecisive as ever and know I’ll just have to try to do them. In the meantime, I’ve been asked to knit some mittens for children. It’s many years since I’ve done mittens and I can’t fully remember how the thumb was done. All the patterns now seem to be for hand knitting so is there any way you could help me again, please? Keep up the good work and many, many thanks, Marilyn
We surprised ourselves, Marilyn at just how long ago we may have published a straightforward pattern for children’s mittens, so here’s a stash box knit. Knit them on any standard gauge machine with a ribber or work ribs in mock rib. You’ll need an oddment of 3-ply wool or fine 4-ply plus safety pins and stitch holders. The tension is fairly tight, to keep the child’s hands nice and warm.
Measurements Length 16 [17.5, 19] cm, 6½ [7, 7½] in.
Tension 30 stitches and 44 rows to 10 cm, 4 in measured over stocking stitch with tension dial around 5.
RIGHT MITTEN With carriage at right and using MY, cast on 36 [40, 44] sts at centre of machine in 1×1 rib. K 5 tubular rows. Carriage is at right. Set machine for 1×1 rib knitting. Set RC at 000. Using MT-3/MT-3, K 24 rows. Transfer sts for st st. Set RC at 000. Using MT, K 2 rows. Shape sides by inc 1 st (2 sts in) at each end on next and every foll 4th row until there are 44 [48, 52] sts. K 3 rows. K 1 row extra for Left Mitten *.
** Thumb opening Using a length of WY, K 7 [8, 9] sts at extreme left as for a buttonhole. K 20 [24, 28] rows. Shape top Push 22 [24, 26] Ns at left to HP. Cont on rem sts. When shaping in HP, always take yarn round first inside N in HP to prevent a hole forming and push 1 N at opposite end to carriage to HP on next 10 [12, 14] rows. Break off yarn. Push Ns to HP. With carriage at left, push 22 [24, 26] Ns at left from HP to UWP. Push 1 N at opposite end to carriage to HP on next 10 [12, 14] rows. Break off yarn. Push all Ns from HP to UWP. K 1 row. Slip sts onto 2 stitch holders and graft. THUMB Place 7 [8, 9] st loops from thumb opening on 2 safety pins. Push 15 [17, 19] Ns to WP. With P side facing, replace sts from safety pins on to 7 [8, 9] Ns at each edge and pick up 1 st at centre. Using MY, K 18 [20, 22] rows. Break off yarn, leaving long end. Thread end through sts, release from machine, draw up sts and secure **.
LEFT MITTEN Work as for Right Mitten to * noting alteration in number of rows worked, then from ** to ** reversing shaping by reading right for left. Join side and thumb seams. Press.