Knitmaster PE1 problems

Can anyone help with advice on this? I don’t know if I’m doing something wrong, or if the PE1 is faulty. I’ve followed the instructions in the manual and everything seems to be okay, but when I click the inspection button light off and press = on the controller it doesn’t feed the card through the reader to read it into the controller. The display says okay but there’s nothing read into the controller because the card doesn’t move.
Thanks for any help.

I have had a problem with my PE1 for some time but it turned out to be a problem with my computer.
As the PE 1 is simply a memory you do not need it to knit a pattern from a card. However if you are saving the pattern onto the PE1 for future use then I think you follow the instructions and then remove card so you can knit from PE1. PLease let me know if I am barking up the wrong tree as there sre very few of us Knitmaster/SR knitters left I use the SR 840
ozmartian
2013-01-27 18:30:35
My first reaction was: Change the cell batterie in the PE-1 Memory card.

Reading further down in your question I assume that something is wrong with the EC-1 pattern reader – or maybe not. Have you tried to set up the EC-1 without the PE-1? Is there still a problem? Or does the card feed through the reader? If no: Clean the reader with the blue cleaning sheet. And take a soft dry cottoncloth rinse the magnet on the pointcams and the magnet on the back of the carriage. Hope that can get you further on. By the way what kind of machine do you use?

strikkan
2013-01-10 18:17:34
I have had a problem with my PE1 for some time but it turned out to be a problem with my computer.
As the PE 1 is simply a memory you do not need it to knit a pattern from a card. However if you are saving the pattern onto the PE1 for future use then I think you follow the instructions and then remove card so you can knit from PE1. PLease let me know if I am barking up the wrong tree as there sre very few of us Knitmaster/SR knitters left I use the SR 840
ozmartian
2013-01-27 18:30:35
My first reaction was: Change the cell batterie in the PE-1 Memory card.

Reading further down in your question I assume that something is wrong with the EC-1 pattern reader – or maybe not. Have you tried to set up the EC-1 without the PE-1? Is there still a problem? Or does the card feed through the reader? If no: Clean the reader with the blue cleaning sheet. And take a soft dry cottoncloth rinse the magnet on the pointcams and the magnet on the back of the carriage. Hope that can get you further on. By the way what kind of machine do you use?

strikkan
2013-01-10 18:17:34